Tapcon® Phillips Flat Head |
|
|
- Fast installation: drill a hole and drive an anchor
- Replaces small-diameter expansion anchors, plugs, and screws in light- to medium- duty applications
- No inserts are required
- Reversible and removable
- Can be installed close to the edge of concrete
- Thread design results in increased pullout values and lower installation torques
- Climaseal® coating provides extra corrosion resistance
- Recommended for use in ACQ pressure-treated lumber
|
Available Sizes
|
Phillips Flat Head |
| Description |
Small
Clam |
Medium
Clam |
Large
Clam | |
| Dia. |
Length |
Drill Bit Size |
|
3/16" |
1-1/4" |
5/32" x 3-1/2" |
|
3/16" |
1-3/4" |
5/32" x 3-1/2" |
|
3/16" |
2-1/4" |
5/32" X 4-1/2" |
|
3/16" |
2-3/4" |
5/32" X 4-1/2" |
|
1/4" |
1-1/4" |
3/16" x 3-1/2" |
|
1/4" |
1-3/4" |
3/16" x 3-1/2" |
|
1/4" |
2-1/4" |
3/16" x 4-1/2" |
|
1/4" |
2-3/4" |
3/16" x 4-1/2" |
|
1/4" |
3-3/4" |
3/16" x 5-1/2" |
|
Installation Instructions:
Drill
Using a hammer drill, drill a hole 1/4" deeper than anchor embedment.
Slide (optional)
Slide Condrive installation tool over drill bit and drill adapter and position Tapcon concrete anchor onto tool.
Drive
Drive Tapcon anchor into pre-drilled hole until anchor is fully seated.
Tapcon anchors require a minimum embedment of 1" and a maximum embedment of 1-3/4". |